Important note: In case of additional machining on your profiles, please allow an extra lead time of 1 to 3 business days.
List of standard machining (available as an option on certain profile references):
These machining operations are applied to the left or right side of the profile.
We carry out these operations on a 5-axis numerically controlled machining bench, thus guaranteeing excellent machining precision.
| Machining type | Specifications | Application example |
|---|---|---|
| End tapping |
Tapping dimensions MxL (specified in the product sheet, “product detail” tab) Left side :
Right side :
|
Use of connectors requiring tapping at the end of the profile
|
|
45° mitter cut |
The type corresponds to the cutting direction.
Type S2 (left and right)
Type S3 (left and right)
Type S4 (left and right)
it is possible to freely select the type of each side, for example S1 on the left and S2 on the right:
|
Making frames with mitter cuts
|
| D through hole (from the front side or the top side) |
Position a through hole of diameter D on the left or right side of the profile.
Upper face :
|
Tightening key passage for assembly by central screw or self-tapping screws
Fastening by quick-release joint
|
|
Lamage Dx/Dy (à partir de la face avant ou la face haute) |
Positions a countersunk hole with diameter Dx/Dy on the left or right side of the profile.
Upper face :
|
Allows the assembly of two profiles using M diameter screws.
|
