Aluminium profile 40x60 6mm slot

Reference 10-AS-6-4060

€48.00 Tax excluded

Rectangular aluminium profile ten 6mm side slots 40x60mm cross section

Reference 10-AS-6-4060

Data sheet

Second moment of inertia (x10^4 mm^4) (y axis): 27
Second moment of inertia (x10^4 mm^4) (x axis): 12.63
Linear mass density (kg/m): 1.80
Cross section (mm²): 665
Cross section (mm): 40x60
Number of slots: 10
Size of slot: 6
Finish: Transparent grey anodised
Central hole diameter: 4,2 mm (for M5 thread)
Main material: Aluminium EN AC-51400-T5
Colour: Grey
Sold by: Custom Length
Cutting tolerance: +/- 1 mm
Customs Code: 76042100

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P)	in Kg	Distance a	in mm
Length L	in mm	Length (m)	in mm
Young's modulus	N/mm²

Step 2: Calculate the result (don't forget to update after each change in value)

Step 3: Determine your assembly and its admissible load

The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)

Maximum deformation recommended for your assembly:

in mm

How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.

Mouting 1	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 2	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 3	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 4	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 5	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 6	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 7	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 8	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg
Mouting 9	Deformation δ (x axis): in mm Deformation δ (y axis): in mm	Max load (x axis) in Kg Max load (y axis) in Kg