

V-SLOT Aluminium profile 20x20 6mm slot - Black anodized + Protective film on all 4 sides
V-SLOT Aluminium profile 20x20 6mm slot - Black anodized
+ Protective film on all 4 sides
Central hole 4.2mm: be careful to check the compatibility of the accessories
Important information: our products are structural products. Despite all the care we take in their treatment, it is possible that our profiles have minor defects, such as scratches, more particularly on the black anodized finish. These aesthetic defects do not in any way modify the structural properties of the product.
Data sheet
The results are given for information only and Systéal declines any responsibility concerning the use of this module.
Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.
Load (P) | in Kg | Distance a | in mm |
Length L | in mm | Length (m) | in mm |
Young's modulus | N/mm² |
in mm |
How to read the results? :
your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly. the deformation is less than the maximum load. Your assembly is correct.Mouting 1![]() |
in mm in mm | in Kg in Kg |
Mouting 2![]() |
in mm in mm | in Kg in Kg |
Mouting 3![]() |
in mm in mm | in Kg in Kg |
Mouting 4![]() |
in mm in mm | in Kg in Kg |
Mouting 5![]() |
in mm in mm | in Kg in Kg |
Mouting 6![]() |
in mm in mm | in Kg in Kg |
Mouting 7![]() |
in mm in mm | in Kg in Kg |
Mouting 8![]() |
in mm in mm | in Kg in Kg |
Mouting 9![]() |
in mm in mm | in Kg in Kg |
The results are given for information only and Systéal declines any responsibility concerning the use of this module.
Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.
Load (P) | in Kg | Length (L) | in mm |
Young's modulus | N/mm² |
How to read the results? :
your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly. the critical load is not exceeded. Your assembly is correct.Assembly 1: for a swivel beam at both ends![]() |
in Kg |
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)![]() |
in Kg |
Assembly 3: for a recessed-swivel beam![]() |
in Kg |
Assembly 4: for a recessed-free beam![]() |
in Kg |
Accessories