ACRO System Laser Engraver 1000x1000mm

ACRO Laser KIT OpenBuild DIY model.

ACRO characterisitcs: 

Laser characteristics :

• Engravable material : wood, paper, bamboo, plastic, leather, rubber, horn.

•  Detaschable materials : Thin paper, sponge paper, light wood, felt, fabric, sticker.

•  Untreated materials : Metlas, glass, stone, ceramics, jewerly, silver, reflective materials, translucent material.

Note:

- The laser wroks at 100% intensity when you plug it directly into power.

- Please DO NOT use it for more than 10 minutes under these conditions otherwise it may cause damage.

- It does not work on curved or cambered surfaces.

Contents of the basic kit :

• Profile

2 x Profilé en aluminium 20x20 fente 6mm (réf 4-AS-6-2020-VSLOT - GREY) LG = 1000mm

3 x Profilé en aluminium 20x40 fente 6mm (réf 6-AS-6-2040-VSLOT - GREY) LG = 1000mm

• Wheel + transmissoin element

• Platinium

• Screws

Important note: The OpenBuild range is DIY. These products must be assembled yourself (using the link below for example). Systéal does not provide technical assistance for the assembly and use of OpenBuild products.

Useful links :

Mecanic assembly

Electronic assembly