Aluminium profile 80x80 10mm slot
  • Aluminium profile 80x80 10mm slot
  • Aluminium profile 80x80 10mm slot
  • Aluminium profile 80x80 10mm slot
  • Aluminium profile 80x80 10mm slot

Aluminium profile 80x80 10mm slot

8-AS-10-8080-SA
€54.90 Tax excluded

Aluminium profile 80x80 10mm slot

Quantity
Out-of-Stock. Contact us for delay
26 units expected in stock on 05/17/2024

Aluminium profile 80x80 10mm slot

8-AS-10-8080-SA

Data sheet

Slot type
B Type (Bosch Rexroth compatible)
Second moment of inertia (x10^4 mm^4) (y axis)
130
Second moment of inertia (x10^4 mm^4) (x axis)
130
Linear mass density (kg/m)
4.45
Cross section (mm²)
1649
Cross section (mm)
80x80
Number of slots
8
Size of slot
10
Finish
Transparent grey anodised
Central hole diameter
6,8 mm (for M8 thread)
Main material
Aluminium EN AW-6063-T5
Colour
Grey
Sold by
Custom Length
Cutting tolerance
+/- 1 mm
Manufacturing tolerances
According to EN 755-9
Customs Code
76042100

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories

Related articles on blog