COVID-19 : suite à une très forte demande, nos délais actuels peuvent être rallongés (jusqu a 2 semaines pour les produits sur mesure).
  • New
V-SLOT Aluminium profile 20x40 6mm slot- Black anodized
  • V-SLOT Aluminium profile 20x40 6mm slot- Black anodized
  • V-SLOT Aluminium profile 20x40 6mm slot- Black anodized
  • V-SLOT Aluminium profile 20x40 6mm slot- Black anodized
  • V-SLOT Aluminium profile 20x40 6mm slot- Black anodized
  • V-SLOT Aluminium profile 20x40 6mm slot- Black anodized

V-SLOT Aluminium profile 20x40 6mm slot- Black anodized

6-ASN-6-2040-VSLOT
€10.90 Tax excluded

V-SLOT Aluminium profile 20x40 6mm slot- Black anodized

Quantity
Pre-order. Available from 05/06

loader

mm (min : 50, max : 4180)

Length
Minimum: 50
Maximum: 4180
Unit: millimeters
Enter the desired length in mm. Maximum delivery length: 4000 mm in France (2400 mm for other countries)

TAPPING SERVICE


Add a tapping on the left end
This option allows you to add a tapping at the left end of the profile. In the case of a profile having several central holes, each central hole will be tapped.


Add a tapping on the right end
This option allows you to add a tapping at the right end of the profile. In the case of a profile having several central holes, each central hole will be tapped.
0 kg
per unit

V-SLOT Aluminium profile 20x40 6mm slot- Black anodized

 

Central hole 4.2mm: be careful to check the compatibility of the accessories

Important information: our products are structural products. Despite all the care we take in their treatment, it is possible that our profiles have minor defects, such as scratches, more particularly on the black anodized finish. These aesthetic defects do not in any way modify the structural properties of the product.

6-ASN-6-2040-VSLOT

Data sheet

Second moment of inertia (x10^4 mm^4) (y axis)
4.75
Second moment of inertia (x10^4 mm^4) (x axis)
1.21
Linear mass density (kg/m)
0.799
Cross section (mm²)
296
Cross section (mm)
20x40
Number of slots
6
Size of slot
6 mm (V-SLOT)
Finish
Black anodised
Central hole diameter
4,2 mm (for M5 thread)
Shape of threading (if option selected)
M5x15
Main material
EN AW-6063-T5
Colour
Black
Sold by
Custom Length
Replaces the reference
6-ASN-6-2040

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories