Notre nouvelle adresse à partir du 23/06 : 17 rue des campanules, 77185 LOGNES.
V-SLOT Aluminium profile 20x40 6mm slot
  • V-SLOT Aluminium profile 20x40 6mm slot
  • V-SLOT Aluminium profile 20x40 6mm slot
  • V-SLOT Aluminium profile 20x40 6mm slot
  • V-SLOT Aluminium profile 20x40 6mm slot
  • V-SLOT Aluminium profile 20x40 6mm slot

V-SLOT Aluminium profile 20x40 6mm slot

6-AS-6-2040-VSLOT
€7.95 Tax excluded

V-SLOT Aluminium profile 20x40 6mm slot

Warning: product currently out of stock. Orders are possible but will not be shipped until 10/29/2020

Quantity
Out-of-Stock - Shipping after 10/29/2020

V-SLOT Aluminium profile 20x40 6mm slot

 

Central hole 4.2mm: be careful to check the compatibility of the accessories

6-AS-6-2040-VSLOT

Data sheet

Second moment of inertia (x10^4 mm^4) (y axis)
4.75
Second moment of inertia (x10^4 mm^4) (x axis)
1.21
Linear mass density (kg/m)
0.799
Cross section (mm²)
296
Cross section (mm)
20x40
Number of slots
6
Size of slot
6 mm (V-SLOT)
Finish
Transparent grey anodised
Rounded
No
Central hole diameter
4,2 mm (for M5 thread)
Shape of threading (if option selected)
M5x15
Main material
EN AW-6063-T5
Colour
Grey
Sold by
Custom Length
Replaces the reference
6-AS-6-2040

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories