Profilé creux en acier  blanc épaisseur 0.7mm
  • Profilé creux en acier  blanc épaisseur 0.7mm
  • Profilé creux en acier  blanc épaisseur 0.7mm

Black steel hollow profile 0.7mm thick

PROF-CN
€6.40 Tax excluded

Black steel hollow profile – plastic coating – 0.7mm thick

Quantity
Shipped within 6-8 days

loader

mm

Length
Minimum: 50
Maximum: 3000
Unit: millimeters
Enter the desired length in mm

0 kg
per unit

Black steel hollow profile – plastic coating – 0.7mm thick

PROF-CN

Data sheet

Linear mass density (kg/m)
0.53
Colour
Black
Sold by
Custom Length

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg