Aluminium Profile 6mm Slot 20x40
  •  Aluminium Profile 6mm Slot 20x40
  • Aluminium profile 20x40 6mm slot

Aluminium profile 20x40 6mm slot

6-AS-6-2040-SA
€6.95 Tax excluded

Square aluminium profile four 6mm side slots 20x20mm cross section

Quantity
Shipped within 2-4 days

loader

mm

Length
Minimum: 50
Maximum: 4180
Unit: millimeters
Enter the desired length in mm

TAPPING SERVICE


Add a tapping on the left end
This option allows you to add a tapping at the left end of the profile. In the case of a profile having several central holes, each central hole will be tapped.


Add a tapping on the right end
This option allows you to add a tapping at the right end of the profile. In the case of a profile having several central holes, each central hole will be tapped.
0 kg
per unit

Aluminium profile 20x40 6mm slot

Please note:

Compatible with all accessories for the same size slot except: accessories with attachment at the ends (diameter of central hole larger than other profiles)

6-AS-6-2040-SA

Data sheet

Second moment of inertia (x10^4 mm^4) (y axis)
5.13
Linear mass density (kg/m)
0.77
Cross section (mm²)
324
Cross section (mm)
20x40
Second moment of inertia (x10^4 mm^4) (x axis)
1.358
Number of slots
6
Size of slot
6
Finish
Transparent grey anodised
Rounded
No
Central hole diameter
5 mm (for M6 thread)
Main material
EN AW-6063-T5
Colour
Grey
Sold by
Custom Length
Old reference
6-AS-6-2040-TPM

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories

Related articles on blog