Profilé aluminium 30x30 fente 8 mm anodisé noir
  • Profilé aluminium 30x30 fente 8 mm anodisé noir
  • Aluminium profile 30x30 four 8mm slots black anodised

Aluminium profile 30x30 four 8mm slots black anodised

4-ASN-8-3030
€15.24 Tax excluded

Black anodised aluminium profile four 8mm side slots 30x30mm cross section

Quantity
Shipped within 6-8 days

loader

mm

Length
Minimum: 50
Maximum: 4000
Unit: millimeters
Enter the desired length in mm

TAPPING SERVICE


Add a tapping on the left end
This option allows you to add a tapping at the left end of the profile. In the case of a profile having several central holes, each central hole will be tapped.


Add a tapping on the right end
This option allows you to add a tapping at the right end of the profile. In the case of a profile having several central holes, each central hole will be tapped.
0 kg
per unit

Black anodised aluminium profile four 8mm side slots 30x30mm cross section

Important information: the black anodized finish is very sensitive to scratches. For this reason, and despite all the precautions we take when handling them, it is possible that the product delivered has this type of defect.

4-ASN-8-3030

Data sheet

Slot type
B Type (Bosch Rexroth compatible)
Second moment of inertia (x10^4 mm^4) (y axis)
2.85
Linear mass density (kg/m)
0.80
Cross section (mm²)
296
Cross section (mm)
30x30
Second moment of inertia (x10^4 mm^4) (x axis)
2.85
Number of slots
4
Size of slot
8
Finish
Black anodised
Rounded
No
Central hole diameter
6,8 mm (for M8 thread)
Shape of threading (if option selected)
M8x24
Main material
EN AW-6063-T5
Colour
Black
Sold by
Custom Length

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories

Related articles on blog