• New
Aluminium profile 30x30 8mm slot
  • Aluminium profile 30x30 8mm slot
  • Aluminium profile 30x30 8mm slot

Aluminium profile 30x30 8mm slot

2O-AS-8-3030-SA
€9.95 Tax excluded

Square aluminium profile one 8mm side slot 30x30mm cross section

Quantity
In stock - Usual processing time: 2 to 4 working days

Square aluminium profile one 8mm side slot 30x30mm cross section

2O-AS-8-3030-SA

Data sheet

Slot type
B Type (Bosch Rexroth compatible)
Second moment of inertia (x10^4 mm^4) (y axis)
3.36
Second moment of inertia (x10^4 mm^4) (x axis)
2.66
Linear mass density (kg/m)
0.937
Cross section (mm²)
347
Cross section (mm)
30x30
Number of slots
1
Size of slot
8
Finish
Transparent grey anodised
Central hole diameter
6,8 mm (for M8 thread)
Shape of threading (if option selected)
M8x24
Main material
EN AW-6063-T5
Sold by
Custom Length
Replaces the reference
2O-AS-8-3030
Cutting tolerance
+/- 1 mm

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories