Suite à notre déménagement, nous ne sommes pas encore joignable par téléphone. Veuillez privilégier le contact par email. Merci pour votre compréhension.
Notre nouvelle adresse à partir du 23/06 : 17 rue des campanules, 77185 LOGNES.
Profilé aluminium 30x30 fente 8 mm
  • Profilé aluminium 30x30 fente 8 mm
  • Aluminium profile 30x30 8mm slot – light version

Aluminium profile 30x30 8mm slot

4-AS-8-3030-SA
€7.90 Tax excluded

Aluminium profile four 8mm side slots 30x30mm cross section

Quantity
In stock - Usual processing time: 2 to 4 working days

loader

mm (min : 50, max : 4180)

Length
Minimum: 50
Maximum: 4180
Unit: millimeters
Enter the desired length in mm. Maximum delivery length: 4000 mm in France (2400 mm for other countries)

TAPPING SERVICE


Add a tapping on the left end
This option allows you to add a tapping at the left end of the profile. In the case of a profile having several central holes, each central hole will be tapped.


Add a tapping on the right end
This option allows you to add a tapping at the right end of the profile. In the case of a profile having several central holes, each central hole will be tapped.
0 kg
per unit

Square aluminium profile four 8mm side slots 30x30mm cross section

4-AS-8-3030-SA

Data sheet

Slot type
B Type (Bosch Rexroth compatible)
Second moment of inertia (x10^4 mm^4) (y axis)
2.635
Second moment of inertia (x10^4 mm^4) (x axis)
2.635
Linear mass density (kg/m)
0.84
Cross section (mm²)
311
Cross section (mm)
30x30
Number of slots
4
Size of slot
8
Finish
Transparent grey anodised
Rounded
No
Central hole diameter
6,8 mm (for M8 thread)
Shape of threading (if option selected)
M8x24
Main material
EN AW-6063-T5
Colour
Grey
Sold by
Custom Length
Old reference
4-ASL-8-3030-SA

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories

Related articles on blog