COVID-19 : suite à une très forte demande, nos délais actuels peuvent être rallongés (jusqu'a 2 semaines pour les produits sur mesure).
SystéAl s'agrandit ! Nous déménageons du 16/06 au 22/06. Il n y aura pas d'expédition pendant cette période, nous vous conseillons ainsi d'anticiper vos commandes.
Profilé aluminium en L 15x30
  • Profilé aluminium en L 15x30
  • Profilé aluminium en L 15x30
  • Flat aluminium profile 20mm thickness 2mm

Flat aluminium profile 20mm thickness 2mm

PROF-PLAT-20x2
€3.84 Tax excluded

Flat aluminium profile 20mm thickness 2mm

Quantity
Shipped within 6-8 days

loader

mm (min : 50, max : 2000)

Length
Minimum: 50
Maximum: 2000
Unit: millimeters
Enter the desired length in mm. Maximum delivery length: 4000 mm in France (2400 mm for other countries)

0 kg
per unit

Flat aluminium profile 20mm

A=20mm

Thickness T=2mm

PROF-PLAT-20x2

Data sheet

Second moment of inertia (x10^4 mm^4) (y axis)
0.133
Second moment of inertia (x10^4 mm^4) (x axis)
0.001
Linear mass density (kg/m)
0.108
Cross section (mm²)
40
Finish
Transparent grey anodised
Main material
EN AW-6063-T5
Colour
Grey
Sold by
Custom Length

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg