Notre nouvelle adresse à partir du 23/06 : 17 rue des campanules, 77185 LOGNES.
Aluminium profile 45x45 four 10mm slots
  • Aluminium profile 45x45 four 10mm slots
  • Aluminium profile 45x45 four 10mm slots
  • Aluminium profile 45x45 four 10mm slots

Aluminium profile 45x45 four 10mm slots

4-AS-10-4545-SA
€17.90 Tax excluded

Square aluminium profile four 10mm side slots 45x45mm cross section

Quantity
In stock - Usual processing time: 2 to 4 working days

Square aluminium profile four 10mm side slots 45x45mm cross section

Note: on this reference, adding an internal thread corresponds to fitting an M12 insert

4-AS-10-4545-SA

Data sheet

Slot type
B Type (Bosch Rexroth compatible)
Second moment of inertia (x10^4 mm^4) (y axis)
15.42
Second moment of inertia (x10^4 mm^4) (x axis)
15.42
Linear mass density (kg/m)
1.93
Cross section (mm²)
713
Cross section (mm)
45x45
Number of slots
4
Size of slot
10
Finish
Transparent grey anodised
Central hole diameter
12,5 mm (usable with M12 inserts)
Shape of threading (if option selected)
Threaded insert M12x14
Main material
EN AW-6063-T5
Colour
Grey
Sold by
Custom Length
Replaces the reference
4-AS-10-4545

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Distance a in mm
Length L in mm Length (m) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The recommended maximum load is the load corresponding to the maximum deformation recommended by the manufacturer (1 / 1000th of the length of the beam)
in mm


How to read the results? :

your mounting is not recommended because the deformation will be too high. Reduce the load or improve your assembly.
the deformation is less than the maximum load. Your assembly is correct.


Mouting 1
in mm
in mm
in Kg
in Kg
Mouting 2
in mm
in mm
in Kg
in Kg
Mouting 3
in mm
in mm
in Kg
in Kg
Mouting 4
in mm
in mm
in Kg
in Kg
Mouting 5
in mm
in mm
in Kg
in Kg
Mouting 6
in mm
in mm
in Kg
in Kg
Mouting 7
in mm
in mm
in Kg
in Kg
Mouting 8
in mm
in mm
in Kg
in Kg
Mouting 9
in mm
in mm
in Kg
in Kg

The results are given for information only and Systéal declines any responsibility concerning the use of this module.

Please note: this simulator currently only works with aluminum profiles. Do not use it for other materials and for plates.

Step 1: Fill in your data

Load (P) in Kg Length (L) in mm
Young's modulus N/mm²


Step 2: Calculate the result (don't forget to update after each change in value)



Step 3: Determine your assembly and its admissible load



The critical buckling load (= maximum load) is calculated using Euler's formula. More information here.

How to read the results? :

your mounting is not recommended because the critical buckling load has been exceeded. Reduce the load or improve your assembly.
the critical load is not exceeded. Your assembly is correct.


Assembly 1: for a swivel beam at both ends
in Kg
Assembly 2: for a recessed beam - movable recessed (along the vertical axis)
in Kg
Assembly 3: for a recessed-swivel beam
in Kg
Assembly 4: for a recessed-free beam
in Kg

Accessories