Information importante:

Notre service client téléphonique sera exceptionnellement fermé du 16/04 au 20/04 inclus.
Pour toute information vous pouvez cependant nous contacter par email (coordonnées en bas du site).
Veuillez nous excuser pour la gêne occasionnée.


Attention nous avons changé d'adresse et de n° de téléphone :
2 allée du Clos des Charmes
77090 COLLEGIEN
Téléphone : +33 (0)9 86 79 59 12

Information

Newsletter

Offers and more!

New products

Aluminium hollow profile – reinforced – anodised

PROF-CALU-R-A

New

Aluminium hollow profile – reinforced – anodised

More details

17,76 € tax excl.

21,31 € tax incl.


Min. 60 - Max. 4000
Min price :5.92 € HT

Aluminium hollow profile – reinforced – anodised

 

Advice: for aluminium hollow profiles, only use metal connectors.

    Second moment of inertia (x10^4 mm^4) (x axis)1.655
    Second moment of inertia (x10^4 mm^4) (y axis)1.655
    Linear mass density (kg/m)0.786
    Cross section (mm²)285
    ColourGrey
    Sold byCustom Length


Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgDistance a in mm
Length L in mmLength m in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The maximum recommended load is the load that corresponds to the maximum deflection recommended by the manufacturer (1/1000th of the length of the beam)
in mm


How do I read the results?:

This setup is not recommended as the deflection is too high. Reduce the load or improve the setup.
The deflection is lower than the maximum recommended load. Your setup is OK.


Setup 1
in mm
in mm
in kg
in kg
Setup 2
in mm
in mm
in kg
in kg
Setup 3
in mm
in mm
in kg
in kg
Setup 4
in mm
in mm
in kg
in kg
Setup 5
in mm
in mm
in kg
in kg
Setup 6
in mm
in mm
in kg
in kg
Setup 7
in mm
in mm
in kg
in kg
Setup 8
in mm
in mm
in kg
in kg
Setup 9
in mm
in mm
in kg
in kg

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgLength L in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The critical buckling load (=maximum load) is calculated using Euler's formula. More information here.

How do I read the results?:

This setup is not recommended as the critical buckling load has been exceeded. Reduce the load or improve the setup.
You have not exceeded the critical load. Your setup is OK.


Setup 1: for a beam that is pinned at both ends
in kg
Setup 2: for a fixed-fixed beam (mobile along the vertical axis)
in kg
Setup 3: for a fixed-pinned beam
in kg
Setup 4: for a fixed-free beam
in kg