Square aluminium tube profile 25x25

PROF-CARRE-25x25-2

New

18,60 € tax excl.

22,32 € tax incl.


Min. 50 - Max. 2000
Min price :4.96 € HT

Square aluminium tube profile 25x25

A=25mm

B=25mm

Thickness: 2mm

    Second moment of inertia (x10^4 mm^4) (x axis)1.634
    Second moment of inertia (x10^4 mm^4) (y axis)1.634
    Linear mass density (kg/m)0.497
    Cross section (mm²)184
    MaterialEN AW-6063-T5


Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgDistance a in mm
Length L in mmLength m in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The maximum recommended load is the load that corresponds to the maximum deflection recommended by the manufacturer (1/1000th of the length of the beam)
in mm


How do I read the results?:

This setup is not recommended as the deflection is too high. Reduce the load or improve the setup.
The deflection is lower than the maximum recommended load. Your setup is OK.


Setup 1
in mm
in mm
in kg
in kg
Setup 2
in mm
in mm
in kg
in kg
Setup 3
in mm
in mm
in kg
in kg
Setup 4
in mm
in mm
in kg
in kg
Setup 5
in mm
in mm
in kg
in kg
Setup 6
in mm
in mm
in kg
in kg
Setup 7
in mm
in mm
in kg
in kg
Setup 8
in mm
in mm
in kg
in kg
Setup 9
in mm
in mm
in kg
in kg

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgLength L in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



La charge critique de flambage (=charge maxi) est calculée avec la formule d'Euler. More information here.

How do I read the results?:

votre montage est déconseillé car la charge critique de flambage est dépassée. Réduisez la charge ou bien améliorez votre montage.
la charge critique n'est pas dépassée. Votre montage est correct.


Montage 1 : pour une poutre rotulée aux deux bouts
in kg
Montage 2 : pour une poutre encastrée - encastrée mobile (selon l'axe vertical)
in kg
Montage 3 : pour une poutre encastrée-rotulée
in kg
Montage 4 : pour une poutre encastrée-libre
in kg