IGUS camera rail for heavy equipment

New

IGUS rail for photo/video tracking shots

More details

72,72 € tax excl.

87,26 € tax incl.


Min. 500 - Max. 4000
Min price :0 € HT

IGUS rail for photo/video tracking shots

Default length: 1m (adjustable between 0.5m and 2.3m)

Width of rail: 80mm

 

The dolly block option enables the user to fix the position of the dolly, whatever its orientation.

Optional spot face holes (diam. 10mm for 3/8" screw) enable the user to fix the camera/equipment to the dolly.

The drilling option positions regular drilled holes along the rail, so that it is easier to fix in place.

Suitable for heavy equipment.

 

Advantages:

 

Movement with no wear and tear, jolts or noise

No lubricants

Simple, quick assembly

No risk of contamination for the user or the camera – no lubricants

Easy handling and transport – light weight

Easy to change trajectory thanks to the system's optimal sliding movement

Quiet, practically silent system as there are no ball bearings

No bowing thanks to extremely rigid aluminium profiles

Quality components



Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgDistance a in mm
Length L in mmLength m in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The maximum recommended load is the load that corresponds to the maximum deflection recommended by the manufacturer (1/1000th of the length of the beam)
in mm


How do I read the results?:

This setup is not recommended as the deflection is too high. Reduce the load or improve the setup.
The deflection is lower than the maximum recommended load. Your setup is OK.


Setup 1
in mm
in mm
in kg
in kg
Setup 2
in mm
in mm
in kg
in kg
Setup 3
in mm
in mm
in kg
in kg
Setup 4
in mm
in mm
in kg
in kg
Setup 5
in mm
in mm
in kg
in kg
Setup 6
in mm
in mm
in kg
in kg
Setup 7
in mm
in mm
in kg
in kg
Setup 8
in mm
in mm
in kg
in kg
Setup 9
in mm
in mm
in kg
in kg

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgLength L in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The critical buckling load (=maximum load) is calculated using Euler's formula. More information here.

How do I read the results?:

This setup is not recommended as the critical buckling load has been exceeded. Reduce the load or improve the setup.
You have not exceeded the critical load. Your setup is OK.


Setup 1: for a beam that is pinned at both ends
in kg
Setup 2: for a fixed-fixed beam (mobile along the vertical axis)
in kg
Setup 3: for a fixed-pinned beam
in kg
Setup 4: for a fixed-free beam
in kg