Aluminium profile 60x60 10mm slot

See all forum topics about "Aluminium profile 60x60 10mm slot - 2C-AS-10-6060"

• See all forum topics about the category "50/60 series profiles"
• See all forum topics from the product keywords

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 3: Determine your setup and its maximum load

The maximum recommended load is the load that corresponds to the maximum deflection recommended by the manufacturer (1/1000th of the length of the beam)

Maximum deflection recommended for your setup:

in mm

How do I read the results?:

This setup is not recommended as the deflection is too high. Reduce the load or improve the setup.
The deflection is lower than the maximum recommended load. Your setup is OK.

Setup 1	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 2	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 3	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 4	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 5	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 6	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 7	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 8	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg
Setup 9	Deflection δ (x axis) : in mm Deflection δ (y axis) : in mm	Max load (x axis): in kg Max load (y axis): in kg

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 3: Determine your setup and its maximum load

The critical buckling load (=maximum load) is calculated using Euler's formula. More information here.

How do I read the results?:

This setup is not recommended as the critical buckling load has been exceeded. Reduce the load or improve the setup.
You have not exceeded the critical load. Your setup is OK.

Setup 1: for a beam that is pinned at both ends	Max load: in kg
Setup 2: for a fixed-fixed beam (mobile along the vertical axis)	Max load: in kg
Setup 3: for a fixed-pinned beam	Max load: in kg
Setup 4: for a fixed-free beam	Max load: in kg