Aluminium profile 40x40 four 10mm slots black anodised

New

25,90 € tax excl.

31,08 € tax incl.

  • No
  • Left
  • Right
  • Right and left


Min. 50 - Max. 4000
Min price :7.77 € HT

Black anodised aluminium profile four 10mm side slots 40x40mm cross section

    Second moment of inertia (x10^4 mm^4) (x axis)10.4
    Second moment of inertia (x10^4 mm^4) (y axis)10.4
    Linear mass density (kg/m)1.73
    Cross section (mm²)640
    Cross section (mm)40x40
    Number of slots4
    Size of slot10
    FinishBlack anodised
    RoundedNo
    Compatibility Ø central hole10,5 mm
    Shape of threading (if option selected)M12x36
    MaterialEN AW-6063-T5
To download in other format, click on the link below
ImageReferenceNomUnit PriceAdd to cart
ECR-P10-8 ECR-P10-8 4,50 € Add
End Cap 40x40 10 mm slot profile - Black EMB-P10-4040-Noir 1,14 € Add
End Cap 40x40 10 mm slot profile - Grey EMB-P10-4040-Gris 1,14 € Add
AKOYPKY8 AKOYPKY8 1,33 € Add
Vis et plaquette de raccord borgne pour profilé à fente de 6 mm VIS-AT-P10 0,93 € Add


Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgDistance a in mm
Length L in mmLength m in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



The maximum recommended load is the load that corresponds to the maximum deflection recommended by the manufacturer (1/1000th of the length of the beam)
in mm


How do I read the results?:

This setup is not recommended as the deflection is too high. Reduce the load or improve the setup.
The deflection is lower than the maximum recommended load. Your setup is OK.


Setup 1
in mm
in mm
in kg
in kg
Setup 2
in mm
in mm
in kg
in kg
Setup 3
in mm
in mm
in kg
in kg
Setup 4
in mm
in mm
in kg
in kg
Setup 5
in mm
in mm
in kg
in kg
Setup 6
in mm
in mm
in kg
in kg
Setup 7
in mm
in mm
in kg
in kg
Setup 8
in mm
in mm
in kg
in kg
Setup 9
in mm
in mm
in kg
in kg

Results are provided on an indicative basis only; Systéal accepts no liability regarding the use of this module.

Please note: this simulator currently only works for aluminium profiles. Do not use it for other materials or for panels.

Stage 1: Enter details

Load Pin kgLength L in mm
Young's modulusN/mm²


Stage 2: Calculate results (do not forget to update the result after changing any values)



Stage 3: Determine your setup and its maximum load



La charge critique de flambage (=charge maxi) est calculée avec la formule d'Euler. More information here.

How do I read the results?:

votre montage est déconseillé car la charge critique de flambage est dépassée. Réduisez la charge ou bien améliorez votre montage.
la charge critique n'est pas dépassée. Votre montage est correct.


Montage 1 : pour une poutre rotulée aux deux bouts
in kg
Montage 2 : pour une poutre encastrée - encastrée mobile (selon l'axe vertical)
in kg
Montage 3 : pour une poutre encastrée-rotulée
in kg
Montage 4 : pour une poutre encastrée-libre
in kg